AMİGURUMİ ANİMAL, CARTOON CHARACTERS, Genel

Amigurumi Rooster Free Crochet Pattern

For knitting it is necessary:

• Yarn of yellow, white, red, black colors.

• When knitting, I used Semenovskaya

“Carolina”: (100 g, 438 meters).

• Wire frame

• Filler

• Eyes

• Felt

Legend:

ch – air loop

sc – single crochet

İNC – increase – 2 sc in one loop

Dec – decrease – 2 sc together

hdc – double crochet

sl-st – connecting column

Knit in a spiral

A master class is not a teaching material.

Crochet knowledge and skills are required.

Good luck with your knitting!

Tail

-Yarn of red color in different shades.

We start knitting with feathers.

First feather

1p – 6sc in ring amiguri

2p – sc in each loop = 6

3-22r (20 rows) – sc in each loop = 6

We begin to knit small feathers on the base.

1 – 8ch – from the second loop from the hook, we return along the chain of air loops back to the base, I knit 2sc in each ch (7 times).

We do this 3 more times. Gathering air loops in this case, we knit through the base.

2. 7ch – from the second loop from the hook, we return along the chain of air loops back to the base, knit 2 ch (6 times) in each ch – 4 times.

3. 6ch – from the second loop from the hook, we return along the chain of air loops back to the base, knit in each ch 2sc (5 times) – 4 times.

4. 5ch – from the second loop from the hook, we return along the chain of air loops back to the base, knit 2 ch (4 times) in each ch – 4 times.

5. 4ch – from the second loop from the hook, we return along the chain of air loops back to the base, I knit 2sc (3 times) in each ch – 4 times.

6. 4ch to the end part of the base – from the second loop from the hook, we return along the chain of air loops back to the base, knit 2 ch in each ch (3 times)

We begin to tie down the second part of the base with feathers.

The binding principle is the same, only in reverse

sequences in ascending order.

1 – 4ch – from the second loop from the hook, we return along the chain of air loops back to the base, I knit 2sc (3 times) in each ch – 4 times.

2. 5ch – from the second loop from the hook, we return along the chain of air loops back to the base, knit 2sc (4 times) in each ch – 4 times.

3. 6ch – from the second loop from the hook, we return along the chain of air loops back to the base, knit in each ch 2sc (5 times) – 4 times.

4. 7ch – from the second loop from the hook, we return along the chain of air loops back to the base, knit in each ch 2sc (6 times) – 4 times.

5. 8ch – from the second loop from the hook, we return along the chain of air loops back to the base, knit in each ch 2sc (7 times) – 4 times

We fix the thread, leave a long end.

Insert the wire into the pen

Second feather

1p – 6sc in ring amiguri

2p – sc in each loop = 6

3-27r (25 rows) – sc in each loop = 6

We begin to knit small feathers on the base.

1 – 8ch – from the second loop from the hook, we return along the chain of air loops back to the base, I knit 2sc in each ch (7 times). We do this 4 more times. Gathering air loops in this case, we knit through the base.

2. 7ch – from the second loop from the hook, we return along the chain of air loops back to the base, knit 2 ch (6 times) in each ch – 5 times.

3. 6ch – from the second loop from the hook, we return along the chain of air loops back to the base, I knit 2 ch (5 times) in each ch – 5 times.

4. 5ch – from the second loop from the hook, we return along the chain of air loops back to the base, knit 2 ch (4 times) in each ch – 5 times.

5. 4ch – from the second loop from the hook, we return along the chain of air loops back to the base, I knit 2sc (3 times) in each ch – 5 times.

6. 4ch to the end part of the base – from the second loop from the hook, we return along the chain of air loops back to the base, knit 2 ch in each ch (3 times)

We begin to tie down the second part of the base with feathers.

The binding principle is the same, only in reverse

sequences in ascending order.

1 – 4ch – from the second loop from the hook, we return along the chain of air loops back to the base, I knit 2sc (3 times) in each ch – 5 times.

2.5ch – from the second loop from the hook, we return along the chain of air loops back to the base, I knit 2sc (4 times) in each ch – 5 times.

3. 6ch – from the second loop from the hook, we return along the chain of air loops back to the base, I knit 2 ch (5 times) in each ch – 5 times.

4. 7ch – from the second loop from the hook, we return along the chain of air loops back to the base, I knit 2 ch (6 times) in each ch – 5 times.

5. 8ch – from the second loop from the hook, we return along the chain of air loops back to the base, knit 2 ch (7 times) in each ch – 5 times.

We fix the thread, leave a long end.

Insert the wire into the pen

Third feather

1p – 6sc in amigu rami ring

2p – sc in each loop = 6

3-32 p (30 rows) – sc in each loop = 6

We begin to knit small feathers on the base.

1 – 8ch – from the second loop from the hook, we return along the chain of air loops back to the base, I knit 2sc in each ch (7 times). We do it another 5 times. Gathering air loops in this case, we knit through the base.

2. 7ch – from the second loop from the hook, we return along the chain of air loops back to the base, knit 2 ch (6 times) in each ch – 6 times.

3. 6ch – from the second loop from the hook, we return along the chain of air loops back to the base, knit 2 ch (5 times) in each ch – 6 times.

4. 5ch – from the second loop from the hook, we return along the chain of air loops back to the base, I knit 2sc (4 times) in each ch – 6 times.

5. 4ch – from the second loop from the hook, we return along the chain of air loops back to the base, I knit 2sc (3 times) in each ch – 6 times.

6. 4ch to the end part of the base – from the second loop from the hook, we return along the chain of air loops back to the base, knit 2 ch in each ch (3 times)

We begin to tie down the second part of the base with feathers.

The binding principle is the same, only in the reverse order – in increasing order.

1 – 4ch – from the second loop from the hook, we return along the chain of air loops back to the base, knit 2 ch in each ch (3 times) – 6 times.

2.5ch – from the second loop from the hook, we return along the chain of air loops back to the base, I knit 2sc (4 times) in each ch – 6 times.

3. 6ch – from the second loop from the hook, we return along the chain of air loops back to the base, knit 2 ch (5 times) in each ch – 6 times.

4. 7ch – from the second loop from the hook, we return along the chain of air loops back to the base, knit 2 ch (6 times) in each ch – 6 times.

5. 8ch – from the second loop from the hook, we return along the chain of air loops back to the base, I knit 2sc (7 times) in each ch – 6 times.

We fix the thread, leave a long end.

Insert in the feather wire

Wings – 2pcs

white yarn

Knit three fingers

First finger – 2pcs.

1p – 6sc in ring amiguri

2p – sc in each loop = 6

3p – (İNC, 5sc) = 7

4p – sc in each loop = 7

5p – (İNC, 6sc) = 8

6p – sc in each loop = 8

7p – (İNC, 7sc) = 9

8p – sc in each loop = 9

9p – (İNC, 8sc) = 10

10p – sc in each loop = 10

11p – (İNC, 9sc) = 11

12p – sc in each loop = 11

13p – (İNC, 10sc) = 12

14p – sc in each loop = 12

15p – (İNC, 11sc) = 13

16p – sc in each loop = 13

17p – (İNC, 12sc) = 14

Fasten and cut the thread.

The second finger – 2pcs

1p – 6sc in ring amiguri

2p – sc in each loop = 6

3p – (İNC, 5sc) = 7

4p – sc in each loop = 7

5p – (İNC, 6sc) = 8

6p – sc in each loop = 8

7p – (İNC, 7sc) = 9

8p – sc in each loop = 9

9p – (İNC, 8sc) = 10

10p – sc in each loop = 10

11p – (İNC, 9sc) = 11

12p – sc in each loop = 11

13p – (İNC, 10sc) = 12

14p – sc in each loop = 12

15p – (İNC, 11sc) = 13

Fasten and cut the thread.

Third finger – 2pcs.

1p – 6sc in ring amiguri

2p – sc in each loop = 6

3p – (İNC, 5sc) = 7

4p – sc in each loop = 7

5p – (İNC, 6sc) = 8

6p – sc in each loop = 8

7p – (İNC, 7sc) = 9

8p – sc in each loop = 9

9p – (İNC, 8sc) = 10

10p – sc in each loop = 10

11p – (İNC, 9sc) = 11

12p – sc in each loop = 11

13p – (İNC, 10sc) = 12

Do not cut the thread.

We begin to connect the fingers to the wing.

1p – 6sc on the third finger, 7sc on the second finger, 14sc on the first finger, 6sc on the second finger, 6sc on the third finger = 39

2p – (11sc, DEC) 3 times = 36

3p – (7sc, DEC) 4 times = 32

Insert the frame

4p – sc in each loop = 32

5p – (6sc, DEC) 4 times = 28

6p – sc in each loop = 28

7p – (5sc, DEC) 4 times = 24

8p – sc in each loop = 24

9p – (4sc, DEC) 4 times = 20

10p – sc in each loop = 20

11p – (8sc, DEC) 2 times = 18

12p – sc in each loop = 18

13p – (7sc, DEC) 2 times = 16

14p – sc in each loop = 16

15p – (6sc, DEC) 2 times = 14

16p – sc in each loop = 14

17p –12sc, DEC = 13sc

18p – sc in each loop = 13

19p –11sc, DEC = 12sc

20-22r (3 rows) – sc in each loop = 12

Fasten and cut the thread. The upper part of the wing can be a little stuffed.

Similarly, we knit the second wing.

Fasten the thread, leave a long end for sewing.

Do not stuff the wing.

Legs (2 parts)

Yarn of yellow and white.

Starting with knitting

Middle fingers (2 pcs)

1p – 6sc in ring amiguri

2p – (İNC) 6 times = 12

3-4r (2 rows) – sc in each loop = 12

5p – (2sc, DEC) 3 times = 9

6-8r (3 rows) – sc in each loop = 9

9p – (1sc, DEC) 3 times = 6

10-11r (2 rows) – sc in each loop = 6

Fasten the thread, cut.

Side fingers (4 pcs)

1p – 6sc in ring amiguri

2p – (İNC) 6 times = 12

3-4r (2 rows) – sc in each loop = 12

5p – (2sc, DEC) 3 times = 9

6-7r (2 rows) – sc in each loop = 9

8p – (1sc, DEC) 3 times = 6

9-10r (2 rows) – sc in each loop = 6

In two parts, we fix the thread and cut it, in two parts we do not cut the thread, and we begin to connect our fingers to the foot.

1p – 3sc on the side finger, 3sc on the middle finger, 6sc on the second side finger, 3sc on the middle finger, 3sc on the side finger = 18

2p – sc in each loop = 18

Insert into fingers wire frame, stuffed with filler (then stuffed in the course of knitting).

3p – (1sc, DEC) 6 times = 12

4p – sc in each loop = 12

Bend the wire up.

5p – 8sc, 2ch, skip 2 sc (we loop around the wire with air loops so that it is the resulting hole), 2sc = 12

6p – 8sc, 2sc by ch of the previous row, 2sc = 12

7p – (1sc, DEC) 4 times = 8

8p – sc in each loop = 8

9p – (DEC) 4 times = 4

We tighten the hole, fasten the thread, cut and hide.

Yellow yarn on the right side, we collect around the wire in the foot of 9sc, set the marker

10-19r (10 rows) – sc in each loop = 9

Change the thread to white.

20p – sc in each loop = 9

21p – for the back half-loop (2sc, İNC) 3 times = 12

22p – for both half loops (1sc, İNC) 6 times = 18

23p – (2sc, İNC) 6 times = 24

24p – (3sc, İNC) 6 times = 30

25-28r (4 rows) – sc in each loop = 30

We attach white yarn to the front half-loops left in the 21st row, we knit into each of them (we hold the part down with the wire when knitting):

1sc, ch, 1Dc, ch, 1sc

Torso, head

Yarn of white color.

We stuff the part in the course of knitting.

1p – 6sc in ring amiguri

2p – (İNC) 6 times = 12

3p – (1sc, İNC) 6 times = 18

4p – (2sc, İNC) 6 times = 24

We begin to attach the legs to the body.

5p – put a foot to the body, and knit at the same time on both parts – 4sc, 8sc on the body, put a second foot on the body, and knit at the same time on both parts – 4sc (put a marker)

6p – 8sc (along the body), 26 (along the leg), 8sc (along the body), 26 (along the leg), = 68

7p – (1sc, İNC) 4 times, sc, (4sc, DEC) 4 times, sc, (1sc, İNC) 4 times, sc, (4sc, DEC) 4 times, sc = 68

8p – İNC, 10sc, İNC, 22sc, İNC, 10sc, İNC, 22sc = 72

9-23r (15 rows) – sc in each loop = 72

We connect the wire from the legs to the main frame.

24p – (10sc, DEC) 6 times = 66

25-26r (2 rows) – sc in each loop = 66

27p – (9sc, DEC) 6 times = 60

In the center, at the back of the 24th row, we attach the tail feathers. We insert the wire into the body, and attach it to the central frame. We fix the remaining thread in the body.

28-29r (2 rows) – sc in each loop = 60

30p – (8sc, DEC) 6 times = 54

31-35r (5 rows) – sc in each loop = 54

36p – (7sc, DEC) 6 times = 48

37-41r (5 rows) – sc in each loop = 48 in the last 41 row do 2 offset loops. We knit the wings.

42p – 19sc along the body, 6sc capturing the body and wing loops, 17sc on the body, 6sc capturing the body and wing loops = 48

We attach the wire of the wing frame to the central frame. We wrap the place of fastening with tape.

43p –19sc along the body, 6sc along the remaining wing loops, 17sc along the body, 6sc along the remaining wing loops = 48

44р –– sc in each loop = 48

45r – (6sc, DEC) 6 times = 42

46-47r (2 rows) – sc in each loop = 42

48p – (5sc, DEC) 6 times = 36

49r – sc in each loop = 36

50r – (4sc, DEC) 6 times = 30

51p – for the back half-loop – sc in each loop = 30

52p – (3sc, DEC) 6 times = 24

53-57r (5 rows) – sc in each loop = 24

58p – (4sc, DEC) 4 times = 20

59-60r (2 rows) – sc in each loop = 20

61p – (8sc, DEC) 2 times = 18

We start to knit a head.

62p – (2sc, İNC) 6 times = 24

63r – (3sc, İNC) 6 times = 30

64p – (4sc, İNC) 6 times = 36

65r – 5sc, (İNChdc) 8 times, 8sc, (İNChdc) 8 times, 7sc = 52

66p – 5sc, (hdc, İNChdc) 8 times, 8sc, (İNChdc, hdc) 8 times, 7sc = 68

67-73r (7 rows) – 5sc, 24hdc, 8sc, 24hdc, 7sc = 68

74p – 5sc, (hdc, DEChdc) 8 times, 8sc, (DEChdc, hdc) 8 times, 7sc = 52

75p – 5sc, (2hdc, DEChdc) 4 times, 8sc, (DEChdc, 2hdc) 4 times 8 times, 7sc = 44

76-80r (5 rows) – sc in each loop = 44

81p – 11sc, DEC, 21sc, DEC, 8sc = 42

82-86r (5 rows) – sc in each loop = 42

87p – (5sc, DEC) 6 times = 36

88r – (4sc, DEC) 6 times = 30

89p – (3sc, DEC) 6 times = 24

90r – (2sc, DEC) 6 times = 18

91p – (sc, DEC) 6 times = 12

92r – (DEC) 6 times = 6

Pull the hole, fasten and hide the thread.

We attach the thread to the front half loops of 51 rows.

Hold the toy with our heads to ourselves, and knit

in rotary rows as follows:

1p – 5sc, ch, turn the knitting

2p – 5sc, ch, turn the knitting

3p – skip one loop, 4sc, ch, turn the knitting

4p – 4sc, ch, turn the knitting

5p – skip one loop, 3sc, ch, turn the knitting

6p – skip one loop, 2sc, ch, turn the knitting

7p – skip one loop, sc

In order not to tear off and attach the thread for each of the parts, I did as follows.

After 7 rows, the left part of the tooth was tied with 6sc, proceeding to the beginning of knitting of the next element. All this is repeated 5 more times.

When all the teeth are connected, change the white thread to red, and bind sc all the teeth. We fix the thread and hide it.

Beak: upper part – yellow yarn

1p – 5sc in the ring amiguri

2p – (İNC) 5 times = 10

3-4r (2 rows) – sc in each loop = 10

5p – (1sc, İNC) 5 times = 15

6p – sc in each loop = 15

7p – (2sc, İNC) 5 times = 20

8p – sc in each loop = 20

9p –– (3sc, İNC) 3 times, 8sc = 23

10p – (2sc, İNC) 5 times, 8sc = 28

11p – İNC, 18sc, İNC, 8sc = 30

12p – (4sc, İNC) 6 times = 36

13p – sc in each loop = 36

The thread will fasten, leave a long end for sewing.

Beak: lower part – yellow yarn

1p – 5sc in the ring amiguri

2p – (İNC) 5 times = 10

3-4r (2 rows) – sc in each loop = 10

5p – (1sc, İNC) 5 times = 15

6p – sc in each loop = 15

7p –– (2sc, İNC) 5 times = 20

8p – sc in each loop = 20

9p – (İNC, 9sc) 2 times = 22

Fasten the thread, leave a long end for sewing.

The top part of the beak is stuffed with filler (but without fanaticism), and the bottom part does not need to be stuffed.

Beard: 2 parts

– yarn of red color

We fill the lower part with the filler during knitting

details (not much)

1p – 6sc in ring amiguri

2p – (İNC) 6 times = 12

3-5r (3 rows) – sc in each loop = 12

6p – (1sc, DEC) 4 times = 8

7p – (2sc, DEC) 2 times = 6

8-10r (3 rows) – sc in each loop = 6

Fasten and cut the thread in the first part. We knit the second part similarly to the first, but we do not cut the thread after 10 rows. We begin to connect the parts.

11p – 3sc for the second part, 6sc for the first, 3sc for the second = 12

12p – sc in each loop = 12

13p – connect the two edges of the part, and knit 6sc, capturing both edges at the same time.

Fasten the thread, leave a long end for sewing.

Comb: consists of 3 parts – red yarn

First part:

1p – 6sc in ring amiguri

2p – (İNC) 6 times = 12

3p – (1sc, İNC) 6 times = 18

4p – (2sc, İNC) 6 times = 24

5-8r (4 rows) – sc in each loop = 24

9p – (2sc, DEC) 6 times = 18

10p – sc in each loop = 18

11p – (1sc, DEC) 6 times = 12

Fasten and cut the thread.

Second part:

1p – 6sc in ring amiguri

2p – (İNC) 6 times = 12

3p – (1sc, İNC) 6 times = 18

4p – (8sc, İNC) 2 times = 20

5-6r (2 rows) – sc in each loop = 20

7p – (3sc, DEC) 4 times = 16

8p – (2sc, DEC) 4 times = 12

9p – sc in each loop = 12

The third part:

1p – 6sc in ring amiguri

2p – (İNC) 6 times = 12

3p – (1sc, İNC) 6 times = 18

4p – sc in each loop = 18

5p – (4sc, DEC) 3 times = 15

6p – (3sc, DEC) 3 times = 12

7p – sc in each loop = 12

Do not cut the thread.

We connect the three parts.

8p – 6sc in the third part, 6sc in the second part, 12sc in the first part, 6sc in the second part, 6sc in the third part =

9-10r (2 rows) – sc in each loop = 36

11p – (7sc, DEC) 4 times = 32

12p – (14sc, DEC) 2 times = 30

Fasten the thread, leave a long end for sewing.

Assembly:

1. Between the cheeks, sew the upper part of the beak.

The top of the part is at level 76 row

torso heads.

2. Under the upper part of the beak part, sew the lower part.

3. Under the bottom of the beak we sew the beard.

4. Sew a comb to the head.

5. I cut out the eyes for the cockerel from white and blue felt, glued a black half-bead as a pupil.

Of white yarn, I tied a chain of ch to the size I needed, and sewn it to the top of my eyes as eyelids.

The lower part of the eye was shaded with black thread embroidery. You can also tie the eyes, you can stick the finished ones.

Vest:

Red yarn

The vest can be knitted, can be sewn from fabric.

Front shelves – 2 parts: knit in rotary rows

3sc in the ring amiguri, ch, twist

1p –3sc = 3sc, ch, turn

2p – İNC, sc, İNC = 5sc, ch, turn

3p – İNC, 3sc, İNC = 7sc, ch, turn

4p – İNC, 5sc, İNC = 9sc, ch, turn

5p – İNC, 7sc, İNC = 11sc, ch, turn

6p – İNC, 9sc, İNC = 13sc, ch, turn

7p – İNC, 11sc, İNC = 15sc, ch, turn

8p – İNC, 13sc, İNC = 17sc, ch, turn

9-17p (9 rows) – 17sc, ch, turn

18p – DEC, 15sc = 16sc, ch, rotation

19p – 14sc, DEC = 15sc, ch, rotation

20p – DEC, 10sc (we do not knit three loops) = 11sc, ch, rotation

21p – skip one loop, 8sc, DEC = 9sc, ch, rotation

22p – DEC, 7sc = 8sc, ch, rotation

23p – 6sc, DEC = 7sc, ch, rotation

24p – DEC, 5sc = 6sc, ch, rotation

25p – 4sc, DEC = 5sc, ch, turn

26p – DEC, 3sc = 4sc, ch, turn

27-31r (5 rows) – 4sc, ch, turn

We fix the thread and cut it. Similarly, we knit the second front shelf.

Red yarn

Back – 1 piece: knit in swivel rows

Dial 36 ch, turn

1p – from the second loop from the hook 35sc, ch, turn

2-3r (2 rows) – 35sc = 35sc, ch, rotation

4p – DEC, 31sc, DEC = 33sc, ch, rotation

5-6p (2 rows) – 33sc = 33sc, ch, rotation

7p – DEC, 29sc, DEC = 31sc, ch, turn

8-9r (2 rows) – 31sc = 31sc, ch, rotation

10p – 3sl-st, 25sc (we do not knit three loops), ch, turn

11p – DEC, 21sc, DEC = 23sc, ch, turn

12p – DEC, 19sc, DEC = 21sc, ch, rotation

13-15r (3 rows) – 21sc = 21sc, ch, rotation

16p – DEC, 17sc, DEC = 19sc, ch, turn

17-18r (2 rows) – 19sc = 19sc, ch, rotation

We fix the thread and cut it.

We sew the side seams with a needle or crochet, then the seams on the shoulder. We knit the vest around the perimeter with yellow yarn.

We put on a vest on a cockerel, we fix it on a trunk.

Sew on buttons or make an imitation of buttons.

That’s all! Our cockerel is ready!

I wish you a good knitting!

Bir cevap yazın

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir